Toilet Partition Stall Panels or Walls - Restroom & ...

13 May.,2024

 

Toilet Partition Stall Panels or Walls - Restroom & ...

Stainless Steel Panels
• Panels range in widths from 10" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Extra weldment areas along door edges provide greater strength.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height stainless steel channels.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart

• Standard panels are 1" thick x 58" high.• Panels range in widths from 10" to 78".• Select a reinforced panel if you will be installing a grab bar on your panel.• Extra weldment areas along door edges provide greater strength.• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height stainless steel channels.• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.• Lead time is approx. 3-5 days. Transit time is additional.

If you are looking for more details, kindly visit stainless steel partition wall.

Price:

$404

The Ultimate Guide for Decorative Metal Screens

Installation Steps:

Due to the material of the decorative metal divider, it is difficult to make changes on site after ordering. Therefore, in order to get the perfect application of the decorative metal divider, a good installation process and steps are essential. The following installation recommendations are provided by LMC Metal:

1. Provide accurate size, provide accurate on-site size, including width, height, and side thickness (need to be considered in embedded installation)

To measure the width, some decorative metal dividers are embedded installation, so the actual headroom width needs to be measured. It is recommended to select three points in the vertical direction to measure the width. Provide the narrowest position to the factory.

To measure the height, it is recommended to select at least three points in the horizontal direction to provide the shortest height to the factory.

2. Order from factory, provide exact size when place the order from factory. If there is an ultra-high or ultra-wide situation, please be sure to communicate with the factory about the splicing method.

3. Measure the finished product size. After receiving the goods, the finished product measurement is carried out first. See if it matches the on-site size.

4. Install the accessories. Generally, we will provide a U-groove for installation, and it is recommended to use explosive screws to fix it on the ceiling or the ground.

5. Install the decorative metal divider.

6. Glue: Glue in the hidden position. The advantage of doing this is to make the decorative metal divider more tightly after fixing. After the glass glue dries, it will act as a buffer between the screen and the installation accessories to avoid abnormal noise.

7. Finished product protection. Before opening the package, it is recommended to use a protective film to protect the decorative metal divider, and then tear off the protective film for use after all the decoration is completed.

Are you interested in learning more about stainless steel sheets manufacturers china? Contact us today to secure an expert consultation!

Generally speaking, we have two situations. Regular and non-regular sizes.

Conventional size: We have the following installation methods:

1. Fixed at the botton and suspended at the top (Application to screen height less than the ceiling, floor mounting)

2. The bottom is fixed, the sides are fixed, and the top less than ceiling.

3. Bottom fixing, ceiling fixing, single side against the wall.

4. Fixed at the botton alone. (Need to make pre-buried parts pre-buried into the concrete base)

Super high size decorative metal screen

1. Make it in sections, the height direction is made of large and small pipe sockets.

2. Generally, we recommend that the frame and the lattice be installed separately. In this way, the frame can be hidden and fixed to the floor and ceiling separately.

3. Considering safety matters, the frame should be made larger and made of thicker materials.

If you want to learn more, please visit our website Customized stainless steel divider.