I have actually looked at those Schmitz a few months ago(thanks for the reminder!), those are some darn nice pliers and cutters! It's hard to go with those when you can get Prime shipping for Knipex. I just wish Knipex offered all their electronics pliers in both serrated and smooth jaws, it would be nice to see them with comfort grips too. Unfortunately, because of this I have had to go to Williams(KAL is the OEM I believe) and Xcelite for my thin(and thinner), serrated needlenose...not that those are poor quality by any means but I like having brand consistency in my tool box/bag.

I've also heard Keiba(Japan) is fantastic. I personally can vouch for some of Engineer(Japan) pliers as well, their screw extraction pliers are excellent. 

Before buying mine, I researched Knipex heavily. To my surprise, they're not as good. 

The primary issue is with the hardening. For example, the teeth are too soft. And this was supported when I saw an independent Rockwell C test that showed they were only coming in at 42HRC rather than the 57HRC* or 62HRC** as advertised. There's also QC issues, such as the jaws not meeting properly in general, so that doesn't instill confidence IMHO.  They do apparently have really nice grips though. 

But the real kicker for me, was free shipping or not with Amazon Prime, the Schmitz come in cheaper. Even after paying for currency conversion and shipping.   

Please note, I'm talking about the box jointed versions or screw type lap joint (example 2,

Not pliers, but the stand-off cutters I have were made when they were still labeled as Made in W. Germany, so we're talking '91 at the latest (Schmitz, but labeled CK Tools). That's at least 25 years of use, yet there's zero slop in the joint. Divide that out, and the cheap stuff is not cost effective at all.

BTW, I started with green handled Diamond Calk and Horseshoe (aka Diamaloy) pliers and cutters as a kid (what they were before Xcelite bought them). Too small these days (end of the handle digs into the palm of my hands.  Another really good one I forgot, is Ironically, the Swanstrom family owned Diamond Calk and Horseshoe before they sold it to Xcelite. Then the turned around and started Swanstrom Tools. 

As it happens, my Swanstrom's are the largest pair I have, and I use them on steel leads without any issues. Paid all of $5.00 for them on eBay.

I've heard very good things about Keiba and Engineer as well (eyeing the thin jawed adjustable wrench). Koken (sockets), KTC (wrenches and other items), Nepros (ratchets), as well as some others too.

  * ESD/Comfort Grip series
** Precision series

For more Pliers Chinainformation, please contact us. We will provide professional answers.

Sounds like you have some great stuff! 

Picked up stuff as NOS and used at the right prices. Downside was it took 5 years to find all of it (there's some more specialized stuff in my collection that is rarely listed).

Only stuff I paid full retail on where the Schmitz, and I don't regret it.

Before buying mine, I researched Knipex heavily. To my surprise, they're not as good.The primary issue is with the hardening. For example, the teeth are too soft. And this was supported when I saw an independent Rockwell C test that showed they were only coming in at 42HRC rather than the 57HRC* or 62HRC** as advertised. There's also QC issues, such as the jaws not meeting properly in general, so that doesn't instill confidence IMHO.They do apparently have really nice grips though.But the real kicker for me, was free shipping or not with Amazon Prime, the Schmitz come in cheaper. Even after paying for currency conversion and shipping.Please note, I'm talking about the box jointed versions or screw type lap joint ( example 1 example 3 ), not the red vinyl dipped versions in terms of cost. HUGE difference in the quality, and for pliers, you want a box joint (can handle the stress in multiple axis', unlike a lap joint = they'll last longer before getting sloppy).Not pliers, but the stand-off cutters I have were made when they were still labeled as Made in W. Germany, so we're talking '91 at the latest (Schmitz, but labeled CK Tools). That's at least 25 years of use, yet there's zero slop in the joint. Divide that out, and the cheap stuff is not cost effective at all.BTW, I started with green handled Diamond Calk and Horseshoe (aka Diamaloy) pliers and cutters as a kid (what they were before Xcelite bought them). Too small these days (end of the handle digs into the palm of my hands.Another really good one I forgot, is Swanstrom Ironically, the Swanstrom family owned Diamond Calk and Horseshoe before they sold it to Xcelite. Then the turned around and started Swanstrom Tools.As it happens, my Swanstrom's are the largest pair I have, and I use them on steel leads without any issues. Paid all of $5.00 for them on eBay.I've heard very good things about Keiba and Engineer as well (eyeing the thin jawed adjustable wrench). Koken (sockets), KTC (wrenches and other items), Nepros (ratchets), as well as some others too.Picked up stuff as NOS and used at the right prices. Downside was it took 5 years to find all of it (there's some more specialized stuff in my collection that is rarely listed).Only stuff I paid full retail on where the Schmitz, and I don't regret it.

Understanding Different Types of Pliers and Their Proper Use

Pliers are versatile hand tools that are used for gripping, bending, cutting, and holding objects. They are an essential tool in many industries, including construction, automotive, and electrical work. It is important to use the proper type of pliers for different tasks to ensure that they are being used safely and effectively. In this article, we will discuss the common types of pliers, their uses, how to choose the right pliers for the job, and how to properly use and maintain them.

1. Common Types of Pliers and Their Uses

There are several types of pliers, each designed for specific tasks. Here are some of the most common types of pliers and their uses:

1. Needle-nose pliers: These pliers have long, narrow jaws that taper to a fine point. They are ideal for gripping and bending wire in tight spaces, as well as reaching into small areas.

1. Slip-joint pliers: These pliers have adjustable jaws that can be set to hold objects of varying sizes. They are ideal for holding and bending objects that are too small for larger pliers.

1. Diagonal pliers: Also known as wire cutters, these pliers have sharp, diagonal cutting edges. They are designed for cutting wire, cables, and other materials.

1. Linesman pliers: These pliers have a strong, sturdy design that makes them ideal for cutting, gripping, and twisting wires. They are commonly used in electrical work.

1. Tongue-and-groove pliers: Also known as channel-lock pliers, these pliers have a set of adjustable jaws that can grip and turn pipes and fittings of different sizes.

1. Locking pliers: These pliers have a locking mechanism that holds objects in place, making them ideal for holding objects steady while working on them.

1. Cutting pliers: These pliers have hardened blades designed to cut through thicker materials such as bolts, nails, and screws.

2. Choosing the Right Pliers for the Job

When choosing pliers for a specific task, there are several factors to consider:

1. Material and thickness of the material being worked on: Different types of pliers are designed to handle different materials and thicknesses. It is important to choose pliers that are suitable for the material being worked on to ensure that they are effective and safe.

2. Size and shape of the object being worked on: The size and shape of the object being worked on will determine the type of pliers that are needed. For example, needle-nose pliers are ideal for working in small spaces, while slip-joint pliers are better for larger objects.

3. Ergonomics and comfort of the pliers: It is important to choose pliers that are comfortable to hold and use, as this will reduce fatigue and increase accuracy.

   Contact us to discuss your requirements of Non-Sparking Tool Sets. Our experienced sales team can help you identify the options that best suit your needs.

3. Proper Use and Maintenance of Pliers

To use pliers safely and effectively, here are some tips to follow:

1. Use the proper type of pliers for the task at hand.

2. Make sure the pliers are clean and free of debris before use.

3. Use pliers with insulated handles when working with electricity.

4. Do not use pliers to cut materials that are too hard or thick for the pliers.

5. When using locking pliers, make sure they are locked securely onto the object being held.

6. Store pliers in a dry place to prevent rust and damage.

To maintain pliers and keep them in good condition, here are some tips:

1. Clean pliers after each use with a soft cloth.

2. Apply a light coat of oil to the pliers to prevent rust.

3. Sharpen cutting edges as needed.

4. Replace worn or damaged pliers.

5. Store pliers in a dry place to prevent rust and damage.

6. IV. Proper Use and Maintenance of Pliers (continued)

      7. Do not use pliers as a hammer or pry bar, as this can damage the tool.

1. When using pliers, make sure to grip them securely and keep them away from your body.

2. Always wear safety goggles when using pliers.

By following these tips, you can ensure that you are using pliers safely and effectively and prolong the life of your tools.

 Conclusion

Pliers are essential hand tools that are used in a variety of industries. It is important to use the proper type of pliers for different tasks to ensure safety and effectiveness. There are several types of pliers, each designed for specific tasks, such as gripping, cutting, and bending. When selecting pliers, it is important to consider factors such as the material being worked on, the size and shape of the object being worked on, and the comfort and ergonomics of the pliers. To use pliers safely and effectively, it is important to follow proper use and maintenance guidelines, such as cleaning pliers after each use and using them only for their intended purpose. By following these guidelines, you can keep your pliers in good condition and use them effectively for years to come.

If you are looking for a screwdriver factory to customize your screwdriver set, please do not hesitate to contact us, thank you!

Want more information on Wholesale High-Strength Explosion-Proof Castable? Feel free to contact us.