You can find more information on our web, so please take a look.
/Your Checklist For Choosing The Right Check Valve
Imagine water or some other fluid like oil or gas is flowing through a pipe. You need it to flow in one direction and not “backtrack”. That’s where a check valve comes in.
It’s important to use the right type of check valve in order to avoid problems or damage to pipeline systems. Here’s our easy guide to check valve types.
Check valves are designed to prevent the backflow of liquid through pipes. They are usually closed until the fluid goes through. They are also able to shut off the valve if the downstream pressure becomes stronger than the upstream pressure.
In order for the system to work right, it’s essential that check valves are installed at the proper intervals.
There are several types of check valves, and each serves a different purpose. Let’s take a look at the 3 main types.
A swing check valve is one of the most common types of check valves. It consists of a body, a bonnet, and a disk with a hinge. The hinge allows the disk to swing back and forth (much like a gate hinge).
Swing valves keep fluids flowing forward. You can find them in different configurations, including traditional, dual-disc, and tilted disc.
Common uses of swing valves:
Flush toilet mechanisms
Water & waste pumping systems
Sewage systems
Firefighting & flood prevention
Work with materials like gas & liquids
Swing check valves are a little larger so they are better suited to situations where a full port valve is required and where space and flow are not an issue.
A lift check valve works much like a globe valve. Rather than a hinge, it uses a piston or ball to open and close the valve. They are designed for use under high-pressure conditions or high-velocity flow.
Common uses of lift check valves:
Water pipes
Heating systems
Pumps
Domestic uses
If you are looking for more details, kindly visit BSTV.
Industrial processes:
Pipelines
Oil & gas
Food & beverage
Biopharma industry
Marine industry
You can use lift check valves in either horizontal or vertical pipelines.
Piston check valves are similar to lift check valves. The difference is that the design incorporates a “dashpot”, which consists of a piston and cylinder. This creates a cushioning or damping effect, which decreases the chances of damage to the pipes.
Piston check valves are available in a couple of different configurations, including Y pattern and 90-degree.
They are often used in conjunction with globe and angle valves, and in pipelines that change the direction of flow frequently.
Uses of piston check valves:
Oil & gas pipelines
Water & sewage pumps
Water pipes
Piston check valves are well suited for high-pressure and high-velocity situations.
Check valves offer an effective way to manage the forward flow of fluids through pipes and pipeline systems. They have many uses in domestic and industrial situations.
However, you must think about the needs of your system in order to choose the right type of check valve. You also need to think about the size and other specs for the pipes or systems.
Contact CVP Manufacturing for more information regarding check valves and our recommended applications or request a quote.
Check valves are simple mechanical devices used to prevent the backflow of fluid, which can cause contamination and damage equipment. Other functions include maintaining a pressurized line, relieving pressure when inlet pressure reaches a desired level and minimizing the effects of water hammer across long stretches of piping.
It’s important to choose a check valve that’s optimally sized for the application. An incorrectly sized valve can lead to premature wear or breakage, or the sealing mechanism can impede full and increase pressure loss.
There are several different types of check valves, including swing checks and sanitary checks that allow for a full port of opening, which minimizes pressure loss as well as the chance that debris will become stuck in the valve. Spring-loaded check valves are simple devices that use a spring to help seal the valve quickly or utilize spring tension to open the valve at a desired point.
Once you know the type of valve that’s required, you can select the right materials for your application. Primarily, check valve bodies are manufactured in bronze, stainless steel or plastic, but can be made using other materials as well. Seals are also available in a variety of materials. It’s important to select the correct body and seal materials for the type of fluid that will be flowing through the valve.
The next consideration is the size of check valve needed for your application. The function of a check valve is to impede the flow of fluid. The Cv, or Valve Flow Coefficient, is the measure of flow capability—how many gallons per minute will flow with a pressure loss of 1 psi. You will want to select a check valve size that maximizes flow and minimizes pressure loss. Pressure rating is also a consideration. Ensure the check valve selected has a maximum pressure rating that fits the application’s pressure.
If you have questions on how to select the right check valve for your application, contact the experts at Strataflo.
If you are looking for more details, kindly visit check valve supplier.