The numbers on an oil seal, also known as a shaft seal or rotary seal, provide important information about its dimensions, material, and design specifications. Understanding these numbers is crucial when selecting the right oil seal for a specific application. Here's a breakdown of the typical numbering system used for oil seals:
For more information, please visit Wholesale FKM TC Oil Seal.
The first set of numbers usually represents the shaft diameter or the inner diameter (ID) of the oil seal. This measurement is critical because it indicates the size of the shaft around which the oil seal will be installed. For example, if the number is 25, it signifies that the oil seal is designed for a shaft with a 25-millimeter diameter.
The second set of numbers corresponds to the housing bore diameter or the outer diameter (OD) of the oil seal. This measurement is crucial as it indicates the size of the bore or cavity in the housing where the oil seal will be placed. For example, if the number is 40, it means the oil seal is designed to fit into a bore with a 40-millimeter diameter.
Rubber Skeleton Oil Seal
The third set of numbers or letter represents the width of the oil seal. It specifies the radial dimension of the seal, indicating how thick or wide the oil seal is. For example, if the number is 7, it means the oil seal has a width of 7 millimeters.
Some oil seals may have additional letters or codes indicating the lip type or special design features. These codes specify the sealing lip material, configuration, or any special features that the oil seal may have. Common lip types include single lip (S), double lip (D), and triple lip (T).
For more o ring vs gasketinformation, please contact us. We will provide professional answers.
In certain numbering systems, a letter or code may be used to indicate the material composition of the oil seal. Different materials may be chosen based on factors like temperature resistance, chemical compatibility, and application requirements.
For example, if you have an oil seal with the number "25-40-7," it can be interpreted as follows:
Inner Diameter (ID): 25 millimeters
Outer Diameter (OD): 40 millimeters
Width: 7 millimeters
Understanding these numbers is crucial when replacing or specifying oil seals for machinery or equipment. It ensures compatibility with the shaft and housing dimensions and helps maintain effective sealing performance. When in doubt, it's recommended to refer to the manufacturer's documentation or consult with a supplier to ensure the correct oil seal is selected for the intended application.
Shipping solutions for the selected quantity are currently unavailable
Are you interested in learning more about oring vs gasket? Contact us today to secure an expert consultation!