The process of installing artificial turf can be described in English as follows

The site where the artificial turf will be installed should be prepared prior to installation. This includes clearing the area of debris, grass, and weeds, as well as smoothing the surface. The subgrade should be level and free of any uneven spots.

The process of installing artificial turf can be described in English as follows:

Site Preparation: The site where the artificial turf will be installed should be prepared prior to installation. This includes clearing the area of debris, grass, and weeds, as well as smoothing the surface. The subgrade should be level and free of any uneven spots.

Base Layer Installation: A base layer is then installed. This typically consists of a layer of crushed rock or gravel that provides drainage and support for the turf. The base layer should be compacted to ensure it is solid and stable.

Installation of the Artificial Turf: The artificial turf is then rolled out onto the prepared surface. It should be unrolled in a smooth and even manner, ensuring that there are no wrinkles or creases. The turf should be securely fastened to the surface using glue or nails, depending on the type of turf and the surface it is being installed on.

Edging and Trimming: The turf is trimmed to fit the perimeter of the area it is being installed in. Edging is done to secure the turf at the edges and prevent it from moving or curling.

Infill Application: An infill material is applied to the turf to give it the desired texture and appearance. The infill material is typically a fine-grained material such as sand or rubber crumb.

Final Inspection and Clean-Up: After the turf is installed and the infill is applied, the area is inspected to ensure that the turf is even, secure, and looks the desired appearance. Any remaining debris or loose material is cleaned up.

Maintenance: Once the turf is installed, it should be maintained regularly to ensure its appearance and performance. This includes sweeping the turf to remove debris, as well as spot-treating any stains or spots that may appear.