Pliers -- The good, the Bad and the AWESOME.... Updated ...

07 Oct.,2024

 

Pliers -- The good, the Bad and the AWESOME.... Updated ...

Probuilt contains other products and information you need, so please check it out.

This is the Plier collection I gathered in under 3 mins... Around my chair in the house - and I dug out some oldies that have never been completely retired from the shop.  They live in a bucket waiting for a use.

Hello - My Name is Shelley and I'm a plier junkie. I have to be after being a chainmailler for 15 years. I have tried MOST tools on the market, and even expanded my jewellery making abilities into silversmithing - which brings on a WHOLE level of new tools.

I see the topic of pliers come up ALL THE TIME on the various chainmail forums. We all have our own preferences, and likes and dislikes, and I am sure my recommendations will differ from yours -- but I wanted to do this post as I've been thinking about it for a long time. PLEASE NOTE - THIS IS MY PERSONAL EXPERIENCE AND OPINION.  My opinion is based on MY hands and comfort of the tools, it's based on my frugalness... what I think is a reasonable amount to spend on a quality tool, and my personal experience with Customer Service when dealing with defective products.  I am not asking you to take my word on every product listed here - this is MY experience, and I hope it helps you if you are plier shopping! 

HISTORY

So my very first pliers I owned were the red handle TRL pliers. I had a wide nose set, and a chain nose set. About 3 weeks into my new hobby I went to the TRL gathering at their farm, and had my pliers swiped. I left them sitting and someone else "borrowed" them, and they were gone. No big deal right? Grab another pair right? This was the FIRST time I remember thinking NOT ALL TOOLS ARE CREATED EQUAL!! The new pliers felt funny, they weren't the ones I was used to... and I was not so impressed to be breaking in new pliers.
Then... My spring BROKE. Nothing worse than getting used to your pliers to have damn spring break and really make your day suck. I like springs in my pliers, as fighting to get them to open isn't my favorite activity. After a few springs broke, we headed off to Lee Valley tools and with some crazy glue, we glued some rare earth Magnets to the inside of the handles... so they repell each other, causing the handles to spring apart. Less push than the real springs give, but enough that you don't have to physically open the pliers each time.

When we started our website back in ... We sold the Black handled pliers shown in the photo above. We bought them from "Crappy" Tire - Canadian Tire specials for a whole $2.49 per pair. We would go to every Canadian Tire we passed and pick through the bin for the wide nose and chain nose varieties. Then we would take them home and use the belt sander to file off the rough spots. We finally got frustrated at the lack of stock that we reached out to our beading wholesalers and brought in pliers that didn't require that kind of attention.

Because I started out with cheap tools, and was using them as a hobby, it didn't dawn on me to pay big money for fancy tools. Back in the luxury tools that maillers talked about were names like Lindstroms, or Snap-ON, but the price tag attached kept my interest level low. Then I had a job working on a factory line for Military Cables. We put the connectors and plugs on to cables and the tool boxes were full of high end tools... Lindstrom pliers and cutters, I think this was my first glimpse at Xuron too! I used some fine long chain nose Lindstrom pliers and thought I had it made. I borrowed them from work and took them home for Chainmail one evening But really didn't like them.  The rings slipped and slid on me, and the ends duckbilled really fast. That first experience with expensive pliers made me cautious about spending my money on high priced tools.

SUPER CHEAP ($5) VS SUPER EXPENSIVE...($50+)

Generally a cheap plier will have a rough jaw surface, and relatively simple handles and springs. If the surface jaw is rough, you can buff with a belt sander, nail file, or dip in Tool Magic, plasti-dip or tape.

The Expensive pliers generally have a nice smooth jaw, good smooth action on the opening and closing, and have nice comfy handles.  Some are cushy, some are a rubbery.  Most offer a spring that should hold up and last for a good period of use.  

I know that some people would rather spend money on supplies than tools, which is understandable. If you like your cheap pliers - all the power to you!! 

We offer a cheap $5 plier option on our website.  I don't do this because I love these pliers.  We do it because we know some people don't want to spend a lot of money when they are starting out, and its a budget decision.

Econo Chain Nose

Econo Wide Nose

BRAND NAME -- Yay or Nay?!?!?

I will be the first one to admit I am a brand name girl.  I buy brands I recognize in the grocery store, I have a horrible addiction to brand name purses and shoes.  So why not pliers?? 

XURONS - My True Love... 

I can't even remember how or why I tried these pliers.  There are little more pricey that cheap pliers, but no where near the expensive pliers prices - We well them HERE on our website for $19.95 -Xuron Short Nose

Xuron pliers are made from strong high carbon steel and have handles that are longer and more comfortable than economy pliers. The action on Xuron pliers is very smooth and comfortable to weave with for long periods of time. We also find that these pliers are excellent for beginners, as they make it easier to manipulate jump rings because you have a much better grip. These are a very wise investment. We prefer Xuron to any of the other more expensive specialty pliers out there!

I have been using these pliers for at least a decade and probably more -- Likely 13 or so years.  I have NEVER returned a pair for warranty ... although I have destroyed a dozen pair through the years.  Once I cleaned the Handles with too much WD-40.. Causing the glue to let go so the handles pulled off and the springs went sproing...I have damaged the jaw surface, but generally on Titanium rings - which is stronger than steel, and beyond the capability of the tool, so that's my fault, not the tool's fault.  I haven't dealt much with Xuron Directly.  Abby at Xuron has sent me some samples when looking at their other tools, which I appreciate.  I buy these from a couple of different wholesale sources depending on what else I need to order and the shipping costs... but we have purchased and sold PAIR OF THESE PLIERS IN 10 years!  

**UPDATE -- I met the fabulous Ashley Bunting from Xuron at Bead and Button - She sent me off with a sample of a new cutter than I can't believe I have lived without.  I also have TONS of testimonials from Customers who HAVE contacted Xuron customer service and they have ALL been treated well and quickly.  

Downside -- Yes!  There is a downside to my babies.  They have such a narrow head, which is awesome for 18 gauge and thinner rings.  This is a problem for 16 gauge and thicker rings as they leave tool marks on big rings.  This requires you to own a wider pair of pliers for big rings.  But that doesn't discount the value of these tools for the right rings. 


Customer Service - As far as I am concerned Xuron feels the same way about Customer service as I do.  They stand BEHIND their product 100% and if you have an issue they make it right.  I personally have never used this service, because the tools I have damaged are due to extensive wear and tear as I use these HOURS a day.  But anyone that has had a tool issue has had their tool replaced with very little hassle and feels good about it.  The main issue I see people having is with the spring.  Sometimes they pop out of place, or rub a little funny.  But unlike other companies, Xuron takes care of you.  This a very big part of why Xuron is an excellent Brand.  They are awesome, and they back their product!


What about Wide Nose Pliers??  We need a good set to compliment our Xurons right??

When we first opened our Store Front and Studio in Saskatoon I needed better suppliers for tools.  We brought in Many different Wubbers pliers.  I was super excited as they were a brand name that people were talking about.  They were also doing some fun mandrel pliers in squares and triangles, and had some awesome things for metal smithing.

I really wanted to LOVE my Wubbers.  A lot of Chainmaillers were talking about them, and many people said they really loved them.  This was the most expensive plier I had tried at the time -- I think we were selling them for $27.95CAD.  These are my Wide Nose wubbers pliers.  They have a very long handle, which is great for people with bigger hands.  My hands, aren't so big, so I found these took some getting used to.  They are the wide nose, so perfect for working with 16 gauge and larger rings.  

What disappointed me in these pliers were basically two things.  First was the springs.  Notice the pair on the right hand side?  The right side spring is broken.  I was lucky to find a pair in my studio (on the left) for this photo that actually has both springs in tact. All the springs in our studio pliers broke. We did the rare earth magnet trick, but the handles are so heavy, they didn't spring open like the cheap little pliers did.  

Secondly what I found disappointing with these pliers is the jaw surface.  They were EASILY marked up just working with jump rings. Once the surface of the plier jaw is dented and gouged, those marks easily transfer to the softer metals you use them on.  I'm not sure why some pliers mark more easily than others - obviously they are using a metal that isn't as strong.  This is where my Price vs quality debate kicks in... it's one thing for $5 pliers to mark up... but $28 pliers should be make from better quality metal.  

Customer Service - I never attempted to return my Wubbers, I was told at the time that you can return them to the company if they fail, and for $15 you will receive a new pair.  That's a discount to replace.  The thing that bothers me about they say their "Quality is Incomparable".. But in my experience the quality was lacking and most of the tools I had failed.  We probably had 20 sets of broken pliers when we closed the studio.  I will be the first to admit when I do something to a tool that I shouldn't - I've ruined MANY a pair of cutters on chain or wire that I shouldn't have snipped... but that was my misuse.  I don't feel using pliers to open jump rings is misuse.  I also don't think the springs should all break off and the surfaces are easily marked up.

UPDATE -- I had the pleasure of meeting Patti Bullard at the Bead & Button Show in .  She is the designer behind Wubbers.  We also tried her new PROLINE of Wubbers -- And I really like them! The plier handles are NOT very padded but they are super comfortable.  I will be buying some of these to see how the springs compare to their older product lines.  But at first sight these impressed me!

Knipex Electronic Wide nose Pliers - 35 12 115

My next major purchase was with Knipex. I had looked at these and hemmed and hawed over them due to price. At about $60 CAD each, this was by far going be my most expensive pliers yet. I was nervous about spending $100 on pliers, but thought It was time to try. Or I was mad at my husband for buying something stupid so I did too..

These Babies are worth every penny you spend on them.  Germany made - High Quality that they SHOULD be bragging about.  The handles are a little hard, not very cushy, but they are comfortable in my opinion.  The handles fit my hands perfectly... they feel solid and sturdy and they get the job done.  I have been using mine for at least 5 years... no damage, no broken springs, no marked jaws or edges.  These are work horses.  I use up to 12 Gauge wire, and have never had an issue.  They are a must own.  Knipex 4.5-Inch Electronics Pliers with Flat Tips

I don't really have anything negative to say about these, other than they are expensive.  But they are worth it because the Quality is so good. They are a must have!

So I guess I got cocky about expensive pliers and thought I needed to try Tronex. They contacted us and sent some samples, and I bought a set of wide nosed 745 Tronex from TRL as they had some custom ones brought in. The only thing that was AWESOME was Jon used his fancy new fiber laser and engraved my NAME into my new pliers. Here they are.

These pliers have big long handles, which were almost uncomfortably big for my hands.   I did notice some marking on the jaws of the pliers in the first few days of using them.  I used these pliers solely on Aluminum as we were doing a big rush project at the time.

This is the first pair of pliers I had BREAK on me.  The whole END of one jaw snapped clear off... ON BRIGHT ALUMINUM JUMP RINGS!!  As you can tell.. I am yelling.  I was very upset and disappointed that I had never had a tool fail like that.  If I was the ONLY person this has happened to, I would think I am just being a cry baby.  But through the joys of facebook I know of at LEAST 5 other people who have had their Tronex pliers break in the same manner.  Not a spring break, but the whole end of the plier.  I have not heard if anyone had luck getting any customer service out of Tronex Directly.  Because I didn't buy from Tronex directly, I didn't think to contact them.  But because of this experience I had, and have seen others have... I wouldn't recommend these pliers.  For the same money I would hands down recommend Knipex instead.

UPDATE FROM TRONEX - June -- They are working on a new design that is heavier duty for chainmailers.  At this point I have counted around 17 people posting in the different forums that they have had their Tronex pliers break as well. So I do look forward to testing the new design to see if they work better for our purposes.

NEW TOOL MUST HAVES 

We have Two Newer tools on our website that are a must own.  First - Xuron's new Chisel Nose pliers.

These are everything that's wonderful about the short nose style, but they are a little wider, and the chisel tip is super fine for tiny Micro maille uses!  I love these and am happy to have them in my collection!  Be careful though.  If you you slip, they are sharp suckers!  I did bleed my first time using them.  They also have goofy around the house uses such as pulling out slivers, and occasional eyebrow tweasing! hahaha.

The next new addition are the Snub Chain Nose Pliers These are new to us this month.  I have been testing them for several weeks and like them!  They are a reasonable price, they are comfortable to work with, and they give you good leverage with the jumprings.  I have no idea how they hold up over time, or what Beadalon's customer service is like, but I haven't had an issue or seen anyone complain either!  Please click on the link above for more details and price!

I was asked about the handles - It's a little strange - I've never seen a plier with one side of the handle more padded than the other - I would have personally added EXTRA padding to both sides.  That being said - they are still comfortable for the time I have been using them, and the difference in padding is slight.  You don't really notice it being too different. I was trying to decide if I liked the extra padding on my thumb side or fingers side... and I didn't find a preference.

As far as a lower price decent quality tool - We found these Swan Brand pliers from one of our beading wholesalers, and have been selling them for around 8 years.  They are a $10 CAD tool so the price reasonable, and the quality is also reasonable.  I can't say I recall having spring break issues.  I know i have never had the end break off like Tronex did.  I recommend these WIDE NOSE for the Japanese Ball kit that uses 12 gauge rings.. Tough suckers to bend. And also great for 18-16 gauge rings that you want the wider tip for.  They are good price for the quality they are and the use they have.

The Chain Nose are a harder sell for me honestly.  The ends are so long, that they slip more and are more awkward for small rings.  You are better off paying double and using the Xurons... and if that isn't in your budget - the new Snub Nose ones are $5 more and way nice tool to work with.  We've always carried this one, sort of as an in between tool. WAY better than the $5 chain nose, but really I'd encourage you to go with Xuron's instead... they are just worth it!!

UPDATE FROM AUGUST

We brought in ANOTHER new Xuron Wide nose plier 483 a few months ago - They are the same at the Chisel nose - without the sharp point! Another must own!!!

For more plier and cutter manufacturerinformation, please contact us. We will provide professional answers.

MY NEW RAINBOW BABIES!!!  June !!!

So I saw these pretty pliers and new I had to have them... even if it was just to decorate my bench.  Because they are AWESOMELY colourful and pretty.  They have no padding on the handles, so I was a little skeptical, but they are actually quite comfortable!  I have been using mine for about a month - no colour wear... no spring breaks... Just comfort and prettiness!!

BUY SOME RAINBOW CHAIN NOSE HERE

BUY SOME RAINBOW WIDE NOSE HERE

Another AMAZING tool find is the NEW Xuron Shear... These babies are amazing for cutting Solder and Bezel wire.  Like AMAZING cuts.  I love them and think every bench needs them!!

BUY SHEAR HERE

How to Choose the Right Pliers For Your Toolbox

0 comments / Posted on Jan 31, by Dynamic Tools USA

Pliers are must-have tools in every tool box, with a basic design and functionality that hasn&#;t changed since medieval times. Every standard tool set includes a pair of pliers, but sometimes understanding the difference between the various styles of pliers can be confusing and intimidating.

This article aims to provide you with the knowledge to understand the components of a plier, the different styles, the intended use, proper maintenance, and how to select your next set.

Pliers Components

Pliers construction consists of 3 main components:

Jaws come in various patterns and designs that provide the tool's functionality, such as pulling, cutting, holding and stripping. The tip of the jaw (nose) can be flat (combination pliers), half round (long nose) and round (electronics pliers), and provide functionalities such as bending, gripping, and holding various objects.

The cutter is designed to cut nails, bolts, wire of different thicknesses and other materials.

Handles provide the means by which the operator can use the pliers. There are a variety of materials used to cover the handles, providing different levels of comfort. Some of the most common materials include moulded material, vinyl dipping, and insulated handles that protect the users against electrical shocks.

The pivot point holds the jaws and handle together. The closer the pivot point to the jaws the more leverage and cutting power the pliers have.

Styles of Pliers

Pliers can be grouped into 3 broad categories, based on their functionality:

Holding - pliers in this category are used to hold objects of various thickness and have no cutting function. Popular models include slip-joint, groove joint, and locking pliers (without wire cutters).

Cutting - this category includes styles such as end cutting and side-cutting, that can only be used to cut nails, bolts, wire, and other materials.

Multifunctional - the jaw configuration of these pliers allow users to perform both holding and cutting operations. Popular models include linesman, bent and long nose pliers.

Below is a more in-depth look at some popular styles:

 

Water pump (Groove - joint) pliers - although not considered a "precision" tool, groove-joint pliers are another must-have tool. This type of pliers allows users to hold objects of various sizes as a result of the 2 jaws being joined by a pivot joint that slides inside a slot.

The most common design feature is a set of curved serrated jaws. The slot might be grooved to allow jaws to be positioned a certain width apart, or have a smooth surface to allow the jaw to quickly adjust to the size of the objects being worked on.

Water pump pliers are used to bend wires and hold objects of various sizes.

Typical sizes are between 8" and 20" in length. A variation of the groove joint pliers features smooth jaws that prevent damaging or marring of the object being handled. These pliers are popular in the aerospace industry, or whenever handling soft materials, such as plastics.

Locking pliers are a distinctive category of pliers rather than a style, as the pliers lock onto the piece to be worked on for better stability.

The first step is to adjust the distance between the 2 jaws according to the size of the piece to be gripped; then clamping the handles together to secure the work piece.

We have written an extensive article on locking tools that can be accessed here.

End-cutting pliers - also known as nippers, are used to cut bolts, wires, nails, and rivets. Due to the almost flat head design, the user can get flush with the surface to cut the object, without digging into it.

The most popular sizes are 7" and 8". A rivet is either exposed or concealed connects the jaws. Some models feature longer handles for increased leverage and access.

Diagonal-cutting pliers - are designed to cut piano, medium and soft wire, nails up to 5 mm thick, and screws.

The jaws and head are not meant to hold objects. Since this design is very popular for electrical work, many manufacturers provide a version with insulated handles, to protect users against electrical shock.

Combination (linesman's) pliers - as the name suggests these are must-haves for those who do electrical work. Because of their multi-functionality, combination pliers are also one of the most popular pliers style in any professional or homeowner's toolbox.

The ridged nose can be used for pulling, grabbing, straightening, bending, and twisting wires together. pulling, bending, straightening, and twisting wires together.

A less-known feature is that the outside edges of the nose can be used to rim off the end of a piece of cut conduit.

The round cavity can be used to hold round objects, such as nuts and bolts. The double cutter near the joint is ideal for cutting wires and threaded bolts.

Long nose pliers - also known as needle-nose pliers, these are similar in functionality to linesman pliers, with the added bonus of allowing the user to reach into tight spots due to the long, tapered jaws.

Depending on the design, long nose pliers may feature various jaw configurations that allow users to perform various tasks.

Additionally, more specialized pliers include crimping pliers (ideal for crimping terminals and connectors for stranded cables with vinyl and rubber insulation), seamers (used in HVAC for bending and flattening sheet metal), fencing pliers, and as well as high leverage and spring loaded models which make opening and closing handles easier.

Intended Use of Pliers

  • Cutting is a common use of pliers, however, pliers are multi-functional tools designed to accomplish a variety of tasks, depending on their design. For example: pulling wire and objects
  • Gripping and holding wires and smaller objects
  • Reaching into confined or awkward spaces
  • Tripping wire insulation
  • Splicing, tuning and bending

How to Choose Your Next Set of Pliers

When selecting your next set of pliers, first decide on the application you need them for. As seen above the degree of versatility differs among various styles, some models being designed to perform multiple functions, while others being designed for more specialised applications.

Once you decide on the style, do your research. Read as much as you can about different brands, read product reviews, watch videos, and ask other professionals what they like in their pliers.

It is important to also try different brands and see which one feels right to you. Pliers can vary in performance, weight, surface finish, handle comfort, and ease of handle opening. In the end it's a matter of personal preference in design and ergonomics.

The budget plays an important role in the choice of pliers. Pliers are one of the most commonly used tools, you will benefit from investing in a quality tool.

Although most brands back their pliers with a lifetime warranty, professionals will not appreciate pliers that don't cut well, dull prematurely or break, and have to be returned for warranty which leads to loss in productivity.

Safety Measures When Using Pliers

Below are some general safety rules that apply to pliers, regardless of style:

Contact us to discuss your requirements of china hand tools wholesaler. Our experienced sales team can help you identify the options that best suit your needs.

  • Check pliers wire cutting capacities and capabilities before selecting a particular model for the job; failing to do so can result in premature wearing of the cutting jaws, and the inability to perform the task.
  • Choose the appropriate pliers for the application. Take the time to educate yourself on the different pliers and their features, such as the types of wires a plier is able to cut, cutting capacity, etc. Failing to do so can result in premature wearing of the tool, inability to perform the job, jaw damage, and even personal injury.
  • Pliers with insulated handles should always be used when working near live wires. Non-insulated handles can easily be confused with insulated ones. A plier with insulated handles features the double triangle symbol or the VDE logo.
  • Use the appropriate size pliers for your hand and personal comfort. Using smaller pliers can result in pinched hands and fingers, while a size too big can lead to the tool being dropped or an inability to operate it efficiently.
  • Always cut at right angles for a clean, effective cut. Avoid bending the wire back and forth; instead, use a bigger size or a model with a bigger cutting capacity.
  • Wear safety glasses when you operate pliers as pieces of material fly unexpectedly.
  • Do not expose pliers to excessive heat, as the tool's properties might change.
  • Do not use pliers as a hammer or hammer on the pliers handles to cut thicker bolts or wires..
  • Do not use pliers for tightening or breaking nuts loose; use a wrench instead to avoid damage to the nut.
  • Clean and maintain your pliers regularly; cleaning the jaws and adding a drop of oil on the rivet will ensure years of dependable use.
  • Always inspect the condition of the plier before using; always use tools that are in safe working order.
  • If the plier is damaged, stop using it and invest in a new set of pliers.