DIY'er here. The basics/essentials in my tool box that I would recommend to anyone else:
Water Pump: 10" is a good all around size, Knipex is the nicest, Channellock is excellent too. I would also highly recommend looking at Doyle brand at Harbor Freight, shockingly high quality teeth for the price.
Locking/"Vise Grip": There are so many different sizes and shapes and I find myself using them all quite equally. Curved, straight, and needle nose jaw are the three most useful, something like a 10" and 6" size is nice to have. The bigger ones don't always fit where you need them. I really like Irwin Vise Grip brand and Bremen brand from HF.
Diagonal cutters: I find these very useful, couldn't live without them. Knipex are premium, Klein Tools 8" are my personal favorite. I also have a Greenlee pair that can be purchased at Menards which are more affordable and they have taken a lot of abuse and have held up very well, I'm very pleased with them. I would buy them again if I ever needed another pair.
Flush cutters: If you do anything with zip ties then these are a must in my opinion. Much easier than using a knife to cut the extra off and you can get a more flush cut than with scissors or traditional diagonal cutters. And they work really well for cutting off already fastened zip ties too. I have the Klein Tools 5" only $10 and I might use them more regularly than any other pliers.
Linesman: Knipex and Klein Tools are very nice but expensive. I really like my Channellock brand linesman.
Needle Nose: I would recommend getting two sizes of needle nose. One that's about 8" and another that is closer to 4". Theres a big difference in functionality of the needle nose on these different size pliers. I have 8" Milwaukee and they're good but not worth the price in my opinion. I have 5" Klein Tools needle nose and they see regular use around the house. I also have a pair of 11" Shimano long handle and I use them quite a bit too.
Slip joint: I find these useful but not everyone else does. They're kinda like an extension of the hand and fingers. I think they're a good all around plier that doesn't cost much, probably one of the cheapest types of pliers you can buy. Good for picking up hot metal. I use them frequently when hobby welding if I need to pick up something hot that I just cut with an angle grinder or if I need to hold something small while I weld it. I would recommend Channellock, Crescent, and Doyle brand and something 6"-8" in length.
Wire strippers: These technically aren't "pliers" but they're a similar mechanism so I'll throw it in there. If you ever do any sort of wiring or electrical work you will obviously need them. I have a pair of Klein Tools and Blue Point and like them both. I like when they have multiple sizes of wire strippers, ridged teeth at the end for gripping, and a cutting mechanism by the pivot point. Simple but useful.
In general it seems like Knipex makes the highest quality pliers out there but of course that comes with a premium. Up to you if its worth it. I personally think it is if you use your pliers regularly. If you don't, probably not worth it. I have many Channellock pliers and I am very satisfied with them all.
Another note. If you're not pressed to get all of these pliers immediately I would say look around at pawn shops, garage sales, the classifieds on Garage Journal, etc. for good deals. Obviously you don't want to buy second hand junk but lightly used pliers can be great. Also, it's not very hard to "revive" a pair of pliers. A small triangle file and you can take dull teeth and make them sharp teeth in a few minutes. With a wire brush, steel wool, and WD40 you can clean rust up and get clean metal again. I have revived many pliers that I have picked up on the cheap and I now use them just as much as nicer ones I have bought new.
With competitive price and timely delivery, Probuilt sincerely hope to be your supplier and partner.
Want more information on plier and cutter manufacturer? Feel free to contact us.
Basically, combination pliers are multipurpose pliers. It combines the gripping jaws and wire cutter as well. This type of plier can be used for compressing, gripping, twisting, bending, extracting, and cutting different materials.
Similar to scissors, combination pliers function by joining two first-class levers so that they can rotate across one another. They can hold on considerably more tightly than you could with just one hand thanks to the magnified force. Despite minor variances in jaw form, they typically feature serrated jaws that generate friction while grasping and square tips. Combination pliers frequently contain a pipe grip&#;a rounded, serrated cutout in the jaws&#;for grasping rounded items.
For more china hand tools wholesalerinformation, please contact us. We will provide professional answers.