Detail&#;
If you are looking for more details, kindly visit our website.
Product code
RF16ASFeed pitch16mmOutside dimensionsEntire length: 530mmheight: 300mm
Mass2.2KGPower supplySupplied from a mounterComponent transporting methodmotor-drivePower-supply voltageDC24V, DC5VAllowable currentMax3.5A (dc24v),Max0.15A (DC5V)
Tape size16mTape typePaper (RF08AS only)and embossed tapes
Applicablecomponent
emboss width
RF08AS: 4.3mm; RF12AS: 8.3mm; RF16AS: 12.2mm; RF24AS: 20.2mm;RF32AS: 23.5mm or less
Applicablecomponent
emboss depth
RF08AS: 3.5mm; RF12AS: 17mm; RF16AS: 17mm; RF24AS: 17mm;RF32AS: 20.0mm or less
Operationenvironmental
conditions during operation
Temperature: 10&#; to 35&#;,humidity: 30 to 80%RH(No condensation)
attitude: m or less
Accuracy guarantee temperatureTemperature: 20&#; to 25&#;Excessive voltageclass
class 1 (EC-1): Excessive voltage is supplied from the circuit whose voltage is limited to a low level (such as a secondary low voltage circuit)Environmentalpollution level
level 3: Environmental whose pollution is worse than that of the nomal environment (such as a manufactuning plant)You just need to tell us your JUKI SMD machine model, or your feeder photos, we will know what type of your requirement, then will quote you the best price within a few minutes.
Cause SMT FEEDER is the most important part of the SMD Machine, So you must choose the better quality feeder for your pick and place machine, some of the feeders not in good condition, it will have a lot of issues while mounting PCB.
So find a good and reliable JUKI FEEDER supplier is also important for your SMT line production.
We will always here be your best friends and partner.
BrandModel No.Tape sizeJUKIRF08AS8mmJUKIRF12AS12mmJUKIRF16AS16mmJUKIRF24AS24mmJUKIRF32AS32mmJUKIRF44AS44mmJUKIRF56AS56mm
Our Services
1.Video technical support
2.24-hour online support
3.Goods tracking support
For more information, please visit KF-SMT.
4.Free broken parts&#;With 1 YEAR warranty&#;
1.Are you a trading company or manufacture?
We are a manufacturer, OEM & ODM service are available.
2.What is your delivery date?
The delivery date is about 1-2 days after receipt of payment.
3.What is your payment terms?
Accept payment by T/T, Paypal, Western Union.
4.Can you provide a whole line solution?
Yes, we can. We can supply
the
SMT full-line, PCB Coating line, DIP line, and LED production line.
CNSMT has a reputation that is unmatched.
We are one of the biggest dealers of SMT machines,Juki feeder, reflow ovens, stencil printers, and much more.
You can always trust us because we guarantee you the best prices without any compromise on quality.
You can get an instant quote of any spare part of the JUKI FEEDER.
We are always here to assist you.
Not many people know that apart from dealing in SMT machines, we also offer a wide array of spare parts and JUKI FEEDER accessories.
And you will receive 100% satisfaction as far as all the spare parts and machines are concerned.
GUARANTEED! If you have any need of JUKI FEEDER, please ask for a quick quote online, we will reply to you as soon as possible.
@Niclas - You make a solid point! I've been tasting purely with white paper tape, I completely forgot about the clear ones. Did you test a photodiode with those? Did it work - or I guess it would have to be Analog to see any difference (if any substantial one). I will test and redesign that if needed, thank you for sharing.
Also, for communication the owner is bent on it being a one-line communication. However, they have supplied multiple different systems for industrial systems where it they use one-line communication and it seems to work flawlessy, so I trust him on that one - I'm just the intern :) (I have only worked with RX/TX and protocols like that at Uni, so surprised he doesnt want both lines when they are literally on the chip we are putting in?)
@Tian - I would say yes, they are. Most of these solid feeders had a high degree of R&D which we dont have the time for. The base of the design is that it can be easily tweaked and changed since the R&D will have to happen over time (if needed) as the machine runs and collects data through the sensors. It only needs to pump out 5 - 100 boards pr. job and those jobs may be once a week, so it doesnt need to be *super* effecient. Costs are also kept super low, as well as maintence, due to all parts being local / local produced. I totally get what you are saying though - but just an example an PNP company not far from here just had their machine go offline for 1 week and it cost them over 25.000$ to have maintence stop by and spend a day fixing it. With this design you can literally just throw out the feeder, pick a new one off the shelve and not spend your paid hours trying to fix it. They will cost about the same (or less) as the paygrade of 1 hour of an Engineer here (Denmark). So a heavy focus on keeping the maintence and cost of the machine as cheap and easy as possible.
&#;
@Mike - Damn it ... you just gave me the idea to completely re-design it to a flat top.. I totally see what you mean, but we arent using 4 nozzles. I will keep the idea in mind because I actually think I could make that change in 1-2 days have a prototype running. Do you know of any other benifits to keep it as flat as possible that I might have missed? I have noticed that almost all industrial ones are completely flat.- Philip
Want more information on Juki Smt Feeder? Feel free to contact us.