In this day and age, we rely on piping systems for a variety of matters, with some being perhaps more crucial than others. Without piping systems, as well as the pipe fittings that sustain them, we would not have fuel. The United States relies on them to transport both natural gas and liquid petroleum. Therefore, as long as we remain reliant on these fuel systems, so too will we remain reliant on piping systems.
But what is the history behind these pipes? When did we begin to use equipment like carbon steel pipe fittings, for example? This complex system may actually date back further than you even realize. With that in mind, let’s explore the history of the pipes that we depend on.
Far before we used the carbon steel pipe fittings that we are used to today, there were actually hydrocarbon pipelines in existence. They in fact date back to China in 500 BC and were crafted of bamboo. China was a massive empire, and it was important that fuel was readily available even in its early days. Long before the United States was even a nation, China was already using natural gas and oil to supply its country with energy. Although there is no record of exactly when China began using natural gas, we know that the local people of Szechuan were already digging into the earth get natural gas and brine before 400 BC.
By the first century BC, their technology had advanced considerably. At that point, the Chinese empire had workers digging as much as 800 feet underground and by 1090 scholars were writing about the future uses of oil. Shen Kua predicted that oil and natural gas would both become widely used for energy. At the time, China often used oil for weapons, medicine, lubricants, ink, and lighting. But it was understood by some that eventually the rest of the world would understand the value of oil and natural gas and expand those uses over time, as did eventually happen.
Shen Kua was obviously correct, and eventually there became a greater demand not only for oil and natural gas, but the pipes that could transport them. In fact, the first methods for producing steel pipes were introduced in the early nineteenth century. William Murdock created a coal burning lamp system, and subsequently joined together long barrels of discarded muskets in order to transport the coal gas. As his light system gradually became more popular and successful, the demand for steel pipelines also grew and the systems became more refined.
In 1824, James Russell patented his method for creating steel tubes that would work as pipes. This method involved joining the tubes together against a flat metal strip. The metal would then be heated until it was malleable, and the edges would be folded together and welded using a drop hammer. The pipe would then be finished by passing it through a groove and rolling mill. However, this method was eventually replaced by that of Cornelius Whitehouse. With this method, a model for current pipe-making processes, the thin sheets of iron were heated and drawn through a cone-shaped opening. They then would curl at the edges and create pipe shapes. The other two ends were then welded together to finish the pipe. Over time, not only these pipes but forged steel fittings like carbon steel pipe fittings would become more widely produced.
Today these pipes are obviously mass produced, with the world production of pipes reaching 78.45 million tons by 2004. Fitting distributors furthermore create and sell fittings to correspond with different pipes, suiting the individualized needs of customers. Therefore, carbon steel pipe fittings can be made to satisfy a range of different requirements, ultimately providing a more precise output.
Although natural gas and petroleum may not be our primary fuel sources forever, we rely upon them now. Furthermore, the fuel that replaces them will likely still require piping systems for transportation. Therefore, these systems are here to stay for the long term. It’s important to understand how they work and how far they’ve come.
Pipe and the materials transported through it keep our society moving, day in and day out – but taking a look at the history of pipe gives insight into how the technology has evolved over millennia to become what we’re most familiar with today. From ancient methods of water transportation to modern materials and mechanics, here’s a look back at the history of pipe.
The Earliest Pipe
Early pipe systems date back to 2500 B.C., when the Macedonians constructed brick-lined pits like modern-day septic systems. Plumbing reached an early high with the sophisticated systems built by the Romans, who had indoor toilets, running water and efficient waste disposal through expansive systems of aqueducts, tile wastewater removal and lead pipe that mostly relied on gravity. Their innovation set the bar for the rest of the world.
Pipe and the Western World
In Boston in 1652, the first waterworks was made using hollowed-out logs as pipe. In fact, redwood was often used as pipe in the western United States because of its properties that protected it from erosion, weathering and insects. Modern galvanized pipe started to appear in the 1800s as urbanization created higher demand for sanitation, and as production efficiency increased, steel pipe prices decreased. The Bessemer process for the mass production of steel in the 1850s caused pipe manufacturing to grow exponentially. Cast iron was also a popular material used in sewer lines, but due to its susceptibility to corrosion, cast iron pipe lined with cement was widely used.
Modern-Day Pipe
In the mid-20th century, ductile iron pipe was introduced as an improvement on cast iron. Concrete pipe was also a popular choice and is still being installed today in storm sewer lines and water mains. Steel is still one of the most commonly used pipe materials, but the introduction of plastic pipes such as PVC, ABS and PEX pipe in the 1950s and ‘60s led to more options for both manufacturing and use. Today, each of these pipe materials can be found in use somewhere in the United States, and all have their own advantages and disadvantages.
All-Tex Pipe & Supply proudly carries a wide range of carbon steel, stainless steel, copper, cast iron and plastic pipe to serve your needs. Contact us today, and we can help you find the best material to fit your project.