Dear Maxx,
Are you interested in learning more about Sand Storage Hopper? Contact us today to secure an expert consultation!
http://help.sap.com/saphelp_erpvp/helpdata/en/c6/fafa11d182be829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Contact us to discuss your requirements of drying room requirements. Our experienced sales team can help you identify the options that best suit your needs.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.
Storage hopper is designed to act as a buffer in a processing line, or between a processing line and a packaging line. The storage hopper will be gradually filled from the bottom to the top. An unloading conveyor is mounted at the bottom of the storage hopper, which can convey the produce out of the storage hopper. There&#;s a roof mounted over the unloading conveyor to reduce pressure over the unloading belt.
Soft landing is mounted at the bottom of the storage hopper. Placed under the zig-zag fall breaker or vertical filling belt to break the fall. A frequency inverter is included to control the speed, and a hatch is also mounted on the side of the machine. The hatch can be used for inspection/cleaning.
Storage hopper filling can be done via two methods, the Zig Zag fall breaker, which is normally used, and the moving vertical belt. The vertical filling belt is used for fresh produce where it is sensitive to damage. This belt starts filling the storage hopper from bottom to top by moving up and down to ensure complete filling of the storage hopper.
If you are looking for more details, kindly visit Lost foam casting equipment.