Re: Epoxy brushes
Click here to get more.
Date: September 03, 10:27AM
FUYI BRUSH Product Page
I have used brushes like these, or the ones from flex coat for years, with 0 issues.One use only please.Each time that I mix a new batch of finish, I use a new brush. When finished with a brush on one coat, I lay the brush on top of the plastic mixing cup that I use and I use the contents of the mixing cup to check on the progress of the finish getting hard. Never put a finger on a coat of finish that is on a rod and may not be cured. If soft, you have left your finger prints in the finish.No need to deal with brush cleaning. No solvent, no fumes, no lost bristles from the brush and no clean up time. Just use and dispose.I apply finish on my power wrapper, so I will often apply finish at 25-75 rpm, so the width of the brush is not terribly important. With a high speed finish application, it only takes two or three minutes for a perfect application of finish to the guide wraps and the butt wraps.No need to dilly dally on each wrap. Apply the finish and let the turning rod smooth and level the finish.Best wishes.
Sorry, we just need to make sure you're not a robot. For best results, please make sure your browser is accepting cookies.
If you are looking for more details, kindly visit FUYI Brush.