Double Cone Vacuum Dryer

30 Sep.,2024

 

Double Cone Vacuum Dryer


The middle of the dryer tank is cylindrical, the two ends are conical, and the top of the cone is provided with inlet and outlet. The inside and outside of the tank are divided into three layers, and the heating medium of the middle jacket adopts circulating hot water; the insulating layer is an aluminum silicate, which consumes very little energy; the inner layer is filled with materials.

Wantong supply professional and honest service.

Rotary drying under vacuum conditions, the material gets heat through the wall while turning, and accelerates drying, which not only avoids the phenomenon that the surface of heat-sensitive materials turns yellow when drying, but also greatly shortens the drying time of materials. The drying time in the oven is about 2/3, which greatly improves labor productivity.

This equipment is especially suitable for drying easily oxidizable and flammable, explosive, toxic materials and heat-sensitive materials. It can show its superiority when it is applied to materials that require no damage to the shape, materials that strictly limit metal ions, and materials that require the discharge of volatiles (or toxic substances) to be recovered (or to destroy toxicity).

Applicable Materials

  • Heat-sensitive materials that cannot withstand high temperatures;
  • Materials that are easily oxidized and dangerous;
  • Materials that do not allow damage to crystals;
  • Materials that need to recover the steam discharged during drying;
  • Materials that need to recover solvents and toxic gases;
  • Materials with extremely low residual volatile content are required.

Technical Parameters

Tank volume (L) 100 350 500 750 Loading volume (L) &#;50 &#;175 &#;250 &#;375 &#;500 &#;750 &#; &#; &#; &#; Speed (rpm) 3&#;13 4 Motor power (kW) 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 Floor area L×W (mm) ×
800 ×
800 ×
800 ×
×
×
×
×
×
x
Swing height (h) Design pressure in the tank (MPa) -0.1&#;0.15 -0.1&#;0.15 When using a condenser, vacuum pump model, power (kW) 2X-15A
2kw 2X-15A
2kw 2X-30A
3kw 2X-30A
3kw 2X-70A
5.5kw JZJX300-8
7kw JZJX300-4
9.5kw JZJX600-8
11kw JZJX600-4
20.5kw JZJX600-4
20.5kw Without condenser, vacuum pump model, power (kW) SK-0.4
1.5kw SK-0.4
1.5kw SK-0.8
2.2kw SK-2.7B
4kw SK-2.7B
4KW SK-3
5.5KW SK-6
11KW SK-6
11KW SK-9
15KW SK-.5KW Weight (kg) 800

Double Cone Vacuum Dryer Configuration List

ID

Equipment Name

Models & Specifications

Material

Quantity

1

Insulating layer

Aluminum silicate

1

2

Charging door

Φ400

SUS304&#;16mm

1

3

Vacuum Head

304 

1

4

Heat conservation layer

75mm Aluminum Silicate

1

5

Machine Frame

brushed exterior

Frame Q235-A.
Outer wall δ=1.5mm 304 stainless steel

6

Rotary Joints

Combination parts

2

7

Motor

7.5Kw, variable frequency speed regulation

Combination parts

1

8

If you are looking for more details, kindly visit Conical Rotary Vacuum Dryer.

Speed Reducer

WPA

Combination parts

1

9

Discharge Butterfly Valve

DN200

The material passes through SUS304

1

10

Electrical Control System

1

11

Thermometer

PT100

1

12

Vacuum Gauge

-0.1&#;0.0

SUS304

2

13

Inverter

7.5Kw

1

14

Hot Water Tank

L

SUS304

1

15&#;

Hot Water Circulation Pump

WYR50-32

Combination parts

1

16

Vacuum Pump

2BV-7.5KW

Combination parts

1

For more information, please visit seasoning blender machine.